Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Xentry no communication with Engine Module
|
21-04-2022, 20:32 PM,
Post: #1
|
|||
|
|||
|
Xentry no communication with Engine Module
Anyone know why Xentry + C4 sd connect (genuine) wont communicate with the engine control unit (ecu /pcm) on a 2008 Sprinter w906.
It will communicate with all the other modules, is there a special cable needed? |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
22-04-2022, 06:50 AM,
Post: #2
|
|||
|
|||
RE: Xentry no communication with Engine Module
(21-04-2022, 20:32 PM)Liteace Wrote: Anyone know why Xentry + C4 sd connect (genuine) wont communicate with the engine control unit (ecu /pcm) on a 2008 Sprinter w906. maybe ecu is defect. if ecu is good than you don't need any extra cables. check if ecu gets power. or send me teamviwer and I can take a look and guide you. |
|||
|
|
|
22-04-2022, 09:17 AM,
Post: #3
|
|||
|
|||
|
RE: Xentry no communication with Engine Module
I have suffered it before, try not to put the contact until I ask you to.
|
|||
|
|
|
22-04-2022, 14:20 PM,
Post: #4
|
|||
|
|||
|
RE: Xentry no communication with Engine Module
I manged to get communication every time with the very old clone gold autocom, autocom software and also delphi software so I dont think the problem is the ecu, very strange how xentry + sd wont
|
|||
|
|
|
24-04-2022, 16:06 PM,
Post: #5
|
|||
|
|||
|
RE: Xentry no communication with Engine Module
|
|||
|
|
|
25-04-2022, 06:53 AM,
Post: #6
|
|||
|
|||
RE: Xentry no communication with Engine Module
(24-04-2022, 16:06 PM)W211 Wrote:(22-04-2022, 14:20 PM)Liteace Wrote: I manged to get communication every time with the very old clone gold autocom, autocom software and also delphi software so I dont think the problem is the ecu, very strange how xentry + sd wont No, I do nothing to Xentry, I have used it on many many Mercedes and this i the 1st time I have had a problem |
|||
|
|
|
26-04-2022, 07:01 AM,
Post: #7
|
|||
|
|||
|
RE: Xentry no communication with Engine Module
This is the onscreen error message BUT as I said before xentry will communicate will all the other modules
|
|||
|
|
|
26-04-2022, 12:48 PM,
Post: #8
|
|||
|
|||
RE: Xentry no communication with Engine Module
(26-04-2022, 07:01 AM)Liteace Wrote: This is the onscreen error message BUT as I said before xentry will communicate will all the other modulesthe best way to know the cause is by debugging the software while diagnosing the vehicle. but don't ask me to support that. afaik, i ever experienced with das 9.890 error. 1. my obd2 cable error > i replace and it is okay 2. wrong mcf definition of the ecu cable, is with a different cable than i use. i edit and add, and it works hope this help |
|||
|
|
|
26-04-2022, 15:32 PM,
Post: #9
|
|||
|
|||
|
RE: Xentry no communication with Engine Module
As I can see, its not xentry van. Its DAS van!
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
