Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

F32 LCI ICAM retrofit issue
21-04-2022, 21:56 PM,
Post: #1
XZBMW  F32 LCI ICAM retrofit issue
Hi there,

i try to retrofit ICAM2 to a F32 LCI (440i) with HU_NBT.

- ICAM2 is factory new (66 53 9 396 832)
- 3AG was added to the VO and activated
- After reading VCM from Car, ICAM2 shows up in the ECU tree
- PSdZ Error shows up at trying to calculate CAF/SWE for ICAM2
- HU_NBT, ICM, FEM_BODY and REM were coded with the calculated CAF/SWE
- When reversing the camera options show up, but no video
- With Dr.Gini i´m able to connect to the ICAM2 ECU and read errors etc
- I´m using ESYS 3.30.1 with PSdZ v.4.34.40 full

Anybody has an idea what can do?

Thanks in advance!

   

   
Quote this message in a reply
21-04-2022, 22:02 PM,
Post: #2
RE: F32 LCI ICAM retrofit issue
hello,

icam2 is not suitable for F32 LCI.

- FSC Apple CarPlay for NBT Evo Fullscreen and MGU  OEM 
- FSC-Set for Retrofit CiC, NBT and NBT Evo with USB 18-11 or remote
- FSC Kafas BE, BF and 7E SLI, Kafas4 Speedlimit 11F, WWA 13, FCW 13F
- VIM for NBT Evo, install with USB 18-11 or remote
- FSC for BMW Apps, Sirius Radio, EPS 
-------------
Location is Germany
Quote this message in a reply
21-04-2022, 22:12 PM,
Post: #3
RE: F32 LCI ICAM retrofit issue
Thanks for the reply,

which ICAM do i need?
I bought a complete Kit including the wiring loom on ebay, which should work on F32 from 07/2017.
The car is manufactured in 11/2017.
Quote this message in a reply
22-04-2022, 06:30 AM,
Post: #4
RE: F32 LCI ICAM retrofit issue
Hey, icam2 should work.. I think that you need to flash the icam2 first by calculating flash for the F32 and clicking the 'hwel from actual' button. After flashing it should be possible to code the camera. You dont get any image because the icam2 doesn't have any coding on it.
Quote this message in a reply
[+] 2 users say Thank You to alexnaoumov for this post
22-04-2022, 08:33 AM,
Post: #5
RE: F32 LCI ICAM retrofit issue
IMHO it will not work. It is not a problem that this is ICAM2. Problem is this specific HWEL 1643_7_0_1 is NOT in F020 series (which covers F032) KIS db which means it was never used or supposed to be used in F32. So ESys does not know what it is and what to do with it.

It is in F025 and some others series KIS db, but using different series to code something is usually very tedious work and can be attempted if you REALLY know what you do only. IMHO just get an ICAM proper for your car.
Quote this message in a reply
[+] 1 user says Thank You to Node for this post
01-05-2022, 17:25 PM,
Post: #6
RE: F32 LCI ICAM retrofit issue
(22-04-2022, 06:30 AM)alexnaoumov Wrote:  Hey, icam2 should work.. I think that you need to flash the icam2 first by calculating flash for the F32 and clicking the 'hwel from actual' button. After flashing it should be possible to code the camera. You dont get any image because the icam2 doesn't have any coding on it.

That was the solution, after flashing the ICAM i get image. No addional coding was needed [Image: yes.gif]
Thank´s a lot!
   
Quote this message in a reply
[+] 1 user says Thank You to Mr.Ukas for this post
01-05-2022, 18:03 PM,
Post: #7
RE: F32 LCI ICAM retrofit issue
(01-05-2022, 17:25 PM)Mr.Ukas Wrote:  
(22-04-2022, 06:30 AM)alexnaoumov Wrote:  Hey, icam2 should work.. I think that you need to flash the icam2 first by calculating flash for the F32 and clicking the 'hwel from actual' button. After flashing it should be possible to code the camera. You dont get any image because the icam2 doesn't have any coding on it.

That was the solution, after flashing the ICAM i get image. No addional coding was needed [Image: yes.gif]
Thank´s a lot!

To which canbus you connected icam2? To can1 or can2?
Quote this message in a reply
01-05-2022, 22:33 PM,
Post: #8
RE: F32 LCI ICAM retrofit issue
(01-05-2022, 17:25 PM)Mr.Ukas Wrote:  
(22-04-2022, 06:30 AM)alexnaoumov Wrote:  Hey, icam2 should work.. I think that you need to flash the icam2 first by calculating flash for the F32 and clicking the 'hwel from actual' button. After flashing it should be possible to code the camera. You dont get any image because the icam2 doesn't have any coding on it.

That was the solution, after flashing the ICAM i get image. No addional coding was needed [Image: yes.gif]
Thank´s a lot!

Good Job, congratulations.


Now, Go to looking for an ICAM2 for my F31 [Image: rofl.gif]
Quote this message in a reply
02-05-2022, 06:49 AM,
Post: #9
RE: F32 LCI ICAM retrofit issue
(01-05-2022, 18:03 PM)Garryq Wrote:  [quote pid='527301' dateline='1651425922']
To which canbus you connected icam2? To can1 or can2?

[/quote]

Hi, it is connected to K_CAN1 (PIN 51 +52) at the FEM. Exactly like in the attached drawing.

   
Quote this message in a reply
[+] 2 users say Thank You to Mr.Ukas for this post
02-05-2022, 10:05 AM,
Post: #10
RE: F32 LCI ICAM retrofit issue
(02-05-2022, 06:49 AM)Mr.Ukas Wrote:  
(01-05-2022, 18:03 PM)Garryq Wrote:  [quote pid='527301' dateline='1651425922']
To which canbus you connected icam2? To can1 or can2?

Hi, it is connected to K_CAN1 (PIN 51 +52) at the FEM. Exactly like in the attached drawing.


[/quote]

Great, nice job smile!
Quote this message in a reply
[+] 1 user says Thank You to alexnaoumov for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS intel123 890 462,536 5 hours ago
Last Post: NeRkO20
  The issue from the seventh circle of hell,,, 530d mj_mj_mj 18 1,010 Yesterday, 14:07 PM
Last Post: ____ANGEL___
  Car Systems / Custom Retrofit Garage ENBT Adapter Ulsmak 33 1,423 Yesterday, 00:17 AM
Last Post: painsage
  G30 LCI Headlights retrofit: High Beam Laser light locking active tcp443 19 3,202 26-03-2024, 21:25 PM
Last Post: Satia
  G05 KAFAS4 enable code missing after Retrofit ACC 6ergsm 19 2,288 26-03-2024, 12:33 PM
Last Post: Hodgsonp
  I020 esys connection issue mcrussell 6 227 25-03-2024, 23:35 PM
Last Post: vanos
  F15 6WB Retrofit VIN Error moreply 4 176 25-03-2024, 07:24 AM
Last Post: RuleNormaliai
  MGU G30 retrofit , PDC does not show laso 3 170 24-03-2024, 14:35 PM
Last Post: laso
  Problem Retrofit electrified steering column on the G31 LCI smercki 12 328 22-03-2024, 12:55 PM
Last Post: Node
XZBMW BMW F01 Pre-LCI NBT EVO Retrofit Satia 3 211 21-03-2024, 12:53 PM
Last Post: Satia

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content