Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW G30 Surround View retrofit
27-06-2022, 19:55 PM,
Post: #1
|
|||
|
|||
BMW G30 Surround View retrofit
Hello,
I retrofitted surround-view 5DN on my BMW G30. !!!! All working no problem. But, I cannot proper flash to my car VO. Camera files SWFL unkn_FFFFFFFF_255_255_255 _______________________________________________ Read SVT before TAL execution started. TAL execution started. VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197] ExecutionID=2022/06/22-19:37:00.766 [] prepareTALExecution started [PROGRESS] [] prepareTALExecution finished [PROGRESS] [] prepareVehicleForFlash started [PROGRESS] [] prepareVehicleForFlash finished [PROGRESS] [ICAM3 - 6] prepareECUforBLUpdate started [PROGRESS] [ICAM3 - 6] prepareECUforBLUpdate finished [PROGRESS] [ICAM3 - 6] authenticateECUforBLUpdate started [PROGRESS] [ICAM3 - 6] authenticateECUforBLUpdate finished [PROGRESS] [ICAM3 - 6 - btld_00002c15-004_008_006] Transaction type: blFlash; Message: TA started [TRANSACTION] [ICAM3 - 6] performECUBLUpdate started with protocol UDS [PROGRESS] MCDDiagService<id=56649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RC_EM_IE - RoutineControl EraseMemory IndicatedErasing, description=error: negative response : requestOutOfRange, link=ICAM3_06_ETHERNET_06> [DIAGSERVICE] [ICAM3 - 6 - btld_00002c15-004_008_006] Transaction type: blFlash; Message: 0% progress on ECUId:ICAM3_0x06 [0% of btld_00002c15-004_008_006] [TRANSACTION] [] job failed with negative response error: code: repeat job description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06 severity: ERROR [THROWABLE] [ICAM3 - 6 - btld_00002c15-004_008_006] Transaction type: blFlash; Message: TA finished [TRANSACTION] [ICAM3 - 6] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error: code: repeat job description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06 severity: ERROR [WARN] [ICAM3 - 6] - [Exception - ICAM3 - 6] job failed with negative response error: code: repeat job description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06 severity: ERROR [ICAM3 - 6] prepareECUforBLUpdate started [PROGRESS] [ICAM3 - 6] prepareECUforBLUpdate finished [PROGRESS] [ICAM3 - 6] authenticateECUforBLUpdate started [PROGRESS] [ICAM3 - 6] authenticateECUforBLUpdate finished [PROGRESS] [ICAM3 - 6 - btld_00002c15-004_008_006] Transaction type: blFlash; Message: TA started [TRANSACTION] [ICAM3 - 6] performECUBLUpdate started with protocol UDS [PROGRESS] MCDDiagService<id=56649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RC_EM_IE - RoutineControl EraseMemory IndicatedErasing, description=error: negative response : requestOutOfRange, link=ICAM3_06_ETHERNET_06> [DIAGSERVICE] [ICAM3 - 6 - btld_00002c15-004_008_006] Transaction type: blFlash; Message: 0% progress on ECUId:ICAM3_0x06 [0% of btld_00002c15-004_008_006] [TRANSACTION] [] job failed with negative response error: code: repeat job description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06 severity: ERROR [THROWABLE] [ICAM3 - 6 - btld_00002c15-004_008_006] Transaction type: blFlash; Message: TA finished [TRANSACTION] [ICAM3 - 6] There was an error during TAL execution, please check the log files. [WARN] [ICAM3 - 6] - [Exception - ICAM3 - 6] job failed with negative response error: code: repeat job description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06 severity: ERROR [ICAM3 - 6] installECUBL started [PROGRESS] [ICAM3 - 6] installECUBL finished [PROGRESS] [ICAM3 - 6] finalizeECUBLUpdate started [PROGRESS] [ICAM3 - 6] finalizeECUBLUpdate finished [PROGRESS] [] There was an error, please check the log files. [WARN] [] - [Exception - ICAM3 - 6] job failed with negative response error: code: repeat job description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06 severity: ERROR MCDDiagService<id=84900, job=com.bmw.psdz.jobs.common.MCD3_DeactivateProgModeNew, service=RDBI_FTP - ReadDataByIdentifier FlashTimingParameter, description=error: timeout, link=ICAM3_06_ETHERNET> [DIAGSERVICE] [] finalizeVehicleFlash started [PROGRESS] [] finalizeVehicleFlash finished [PROGRESS] [] prepareVehicleForCoding started [PROGRESS] [] prepareVehicleForCoding finished [PROGRESS] [] finalizeVehicleCoding started [PROGRESS] [] finalizeVehicleCoding finished [PROGRESS] [] finalizeTALExecution started [PROGRESS] [] finalizeTALExecution finished [PROGRESS] TAL execution finished [TAL_EXECUTION_FINISHED] TAL-Execution finished with status: "FinishedWithError". [C207] TAL execution finished. Duration: "1min 3s". [C206] Read SVT after TAL execution started. Read SVT after TAL execution finished. Read SVT before TAL execution started. TAL execution started. VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197] ExecutionID=2022/06/22-19:39:22.140 [] prepareTALExecution started [PROGRESS] [] prepareTALExecution finished [PROGRESS] [] prepareVehicleForFlash started [PROGRESS] [] prepareVehicleForFlash finished [PROGRESS] [ICAM3 - 6] prepareECUforFlash started [PROGRESS] [ICAM3 - 6] prepareECUforFlash finished [PROGRESS] [ICAM3 - 6] authenticateECUforFlash started [PROGRESS] [ICAM3 - 6] authenticateECUforFlash finished [PROGRESS] [ICAM3 - 6 - swfl_00002c16-013_002_001] Transaction type: swDeploy; Message: TA started [TRANSACTION] [ICAM3 - 6] performEcuFlash started with protocol UDS [PROGRESS] MCDDiagService<id=56649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlash, service=RC_EM_IE - RoutineControl EraseMemory IndicatedErasing, description=error: negative response : requestOutOfRange, link=ICAM3_06_ETHERNET_06> [DIAGSERVICE] [ICAM3 - 6 - swfl_00002c16-013_002_001] Transaction type: swDeploy; Message: 0% progress on ECUId:ICAM3_0x06 [0% of swfl_00002c16-013_002_001] [TRANSACTION] [] job failed with negative response error: code: repeat job description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06 severity: ERROR [THROWABLE] [ICAM3 - 6 - swfl_00002c16-013_002_001] Transaction type: swDeploy; Message: TA finished [TRANSACTION] [ICAM3 - 6] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error: code: repeat job description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06 severity: ERROR [WARN] [ICAM3 - 6] - [Exception - ICAM3 - 6] job failed with negative response error: code: repeat job description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06 severity: ERROR [ICAM3 - 6] prepareECUforFlash started [PROGRESS] [ICAM3 - 6] prepareECUforFlash finished [PROGRESS] [ICAM3 - 6] authenticateECUforFlash started [PROGRESS] [ICAM3 - 6] authenticateECUforFlash finished [PROGRESS] [ICAM3 - 6 - swfl_00002c16-013_002_001] Transaction type: swDeploy; Message: TA started [TRANSACTION] [ICAM3 - 6] performEcuFlash started with protocol UDS [PROGRESS] MCDDiagService<id=56649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlash, service=RC_EM_IE - RoutineControl EraseMemory IndicatedErasing, description=error: negative response : requestOutOfRange, link=ICAM3_06_ETHERNET_06> [DIAGSERVICE] [ICAM3 - 6 - swfl_00002c16-013_002_001] Transaction type: swDeploy; Message: 0% progress on ECUId:ICAM3_0x06 [0% of swfl_00002c16-013_002_001] [TRANSACTION] [] job failed with negative response error: code: repeat job description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06 severity: ERROR [THROWABLE] [ICAM3 - 6 - swfl_00002c16-013_002_001] Transaction type: swDeploy; Message: TA finished [TRANSACTION] [ICAM3 - 6] There was an error during TAL execution, please check the log files. [WARN] [ICAM3 - 6] - [Exception - ICAM3 - 6] job failed with negative response error: code: repeat job description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06 severity: ERROR [ICAM3 - 6] finalizeECUFlash started [PROGRESS] [ICAM3 - 6] finalizeECUFlash finished [PROGRESS] [] There was an error, please check the log files. [WARN] [] - [Exception - ICAM3 - 6] job failed with negative response error: code: repeat job description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: ICAM3_06_ETHERNET_06 severity: ERROR [] finalizeVehicleFlash started [PROGRESS] [] finalizeVehicleFlash finished [PROGRESS] [] prepareVehicleForCoding started [PROGRESS] [] prepareVehicleForCoding finished [PROGRESS] [] finalizeVehicleCoding started [PROGRESS] [] finalizeVehicleCoding finished [PROGRESS] [] finalizeTALExecution started [PROGRESS] [] finalizeTALExecution finished [PROGRESS] TAL execution finished [TAL_EXECUTION_FINISHED] TAL-Execution finished with status: "FinishedWithError". [C207] TAL execution finished. Duration: "1min 3s". [C206] Read SVT after TAL execution started. Read SVT after TAL execution finished. |
|||
28-06-2022, 07:24 AM,
Post: #2
|
|||
|
|||
RE: BMW G30 Surround View retrofit
First make sure the VIN is written to the module. Then when flashing select only swfl files. After that you can try flash remaining files
|
|||
28-06-2022, 08:16 AM,
Post: #3
|
|||
|
|||
RE: BMW G30 Surround View retrofit
This can be caused by bad camera.
|
|||
30-06-2022, 21:00 PM,
Post: #4
|
|||
|
|||
RE: BMW G30 Surround View retrofit
|
|||
30-06-2022, 21:33 PM,
Post: #5
|
|||
|
|||
RE: BMW G30 Surround View retrofit
Your FA is wrong and i step shipment is not 20-11-550
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
30-07-2022, 08:11 AM,
Post: #6
|
|||
|
|||
RE: BMW G30 Surround View retrofit
Did you solve the problem?
I have a similar problem as you, but my error appears at - SWFL_00002C17[MasterIO_SlaveNIO] I can not finish the flash, therefore the cameras do not work. Another thing is esys shows me that I need a SAS module for the 5DN option, according to the TIS wiring diagram at the g30 from 2018 with the bdc2 the SAS module is only needed for radar 5AT. Any ideas? would some damaged camera do that? |