Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Digiprog yanhua burn 95x chip
22-09-2014, 18:09 PM,
Post: #1
|
|||
|
|||
Digiprog yanhua burn 95x chip
HI, i have a strange situation. My digiprog burn all 95128 or 95320 chips when i use st01 cable. If i use yanhua 01/04 adapter and solder chip on it it is ok. With cable is the problem and when i make read chip get really hot in 1 sec.
|
|||
22-09-2014, 19:14 PM,
Post: #2
|
|||
|
|||
RE: Digiprog yanhua burn 95x chip
Check your st01 cable, maybe it has wrong soldered cables !
Stop worrying about what can go wrong, and get excited about what can go right.
PRESS THANKS IF YOU LIKE MY POST AND IT HELPED YOU |
|||
Reputation: +1 - pioan [+1] | |||
23-09-2014, 13:33 PM,
Post: #3
|
|||
|
|||
RE: Digiprog yanhua burn 95x chip
You are right! Chinese soldered a wrong wire. I resolder but now it not reading. Do you know if cable has 1m lenght is the problem?
|
|||
23-09-2014, 13:39 PM,
Post: #4
|
|||
|
|||
RE: Digiprog yanhua burn 95x chip
Yes if the cable is too long this can cause a problem
|
|||
23-09-2014, 17:28 PM,
Post: #5
|
|||
|
|||
RE: Digiprog yanhua burn 95x chip
|
|||
25-09-2014, 07:19 AM,
Post: #6
|
|||
|
|||
RE: Digiprog yanhua burn 95x chip
Not 100% sure why that is the case but this is what I was told by someone who had been doing this work for many years.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content