Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ford Mustang FR3T-14B321-AJ Clear Crash with Carprog help
18-07-2022, 22:24 PM,
Post: #1
|
|||
|
|||
Ford Mustang FR3T-14B321-AJ Clear Crash with Carprog help
Hello,
I'm not able to bench it up and run on table with carprog. It is always showing me "connect error" Very appreciated for good advices and help. These Images ive used to work with. Kind regards Tools im using: Carprog China and VVDI prog |
|||
19-07-2022, 02:44 AM,
Post: #2
|
|||
|
|||
RE: Ford Mustang FR3T-14B321-AJ Clear Crash with Carprog help
Open unit find pinout for read CPU XC2336A-72F
Upa , xprog , vvdi prog.....etc Br.v BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
19-07-2022, 08:02 AM,
Post: #3
|
|||
|
|||
RE: Ford Mustang FR3T-14B321-AJ Clear Crash with Carprog help
Alright, so I'll send your the dump correct?
|
|||
19-07-2022, 08:49 AM,
Post: #4
|
|||
|
|||
RE: Ford Mustang FR3T-14B321-AJ Clear Crash with Carprog help
(19-07-2022, 08:02 AM)screwdriver Wrote: Alright, so I'll send your the dump correct? That's right, we will delete the crash date for you using the dump |
|||
19-07-2022, 10:38 AM,
Post: #5
|
|||
|
|||
RE: Ford Mustang FR3T-14B321-AJ Clear Crash with Carprog help
did u used 500ohm resistor between CAN lines? if not then try this way
|
|||
19-07-2022, 14:37 PM,
Post: #6
|
|||
|
|||
RE: Ford Mustang FR3T-14B321-AJ Clear Crash with Carprog help
Nah I didn't tried any termination. I'm not even sure if I got an 500 ohm resistor... I'm thinking about to get a generator to set up resistance, Can you maybe suggest something good? For this time I'll desolder a resistor from a pcb and will report later!
|
|||
22-07-2022, 00:56 AM,
(This post was last modified: 22-07-2022, 00:58 AM by screwdriver.)
Post: #7
|
|||
|
|||
RE: Ford Mustang FR3T-14B321-AJ Clear Crash with Carprog help
(19-07-2022, 08:49 AM)Oleg_26 Wrote: That's right, we will delete the crash date for you using the dump Okay finally got the dump from it. Best regards. |