[justdiag]

Offboard Diagnostic Information System Service 10.0



Password for the files if needed is justdiag

BEWARE:
1. The program works only with 64 bits systems from Windows 10 UP.
2. The interfaces supported are GENUINE VAS 615X and Passthru (beware on PT limitations)

Activations will be done ONLY for users with minimum 80 POSTS (max 2 keys/user).

***NOTE***
Before you request a key please disconnect any usb drives from your system , Launcher or GETID must be run As Administrator, autotranslate must be OFF and VM's are not supported.

Please make sure you select a license.dat(from License&GetID.7z) on install of the program, if you don't then after it's registration you will get an error.

As you can see registrations are free as long as you contribute to the life of the forum (min. posts).
If you can't do that or you do not have the time to do that.... or any other reason, please stop posting requests and be annoying since activation keys can be bought in Marketplace Area -
HERE

Added postsetup 250 from 2022.11.15

[cicoe]

Hi, have you found a way to skip the new Geko login request necessary also for Self-diagnosis?

Regards

[jinyouZ]

hi
Does the ODIS10 diagnostic vehicle must enter a GEKO account?

[isdochegal]

Please send me a key for my HWID:

42BB-1CE7-4AB1-A3F1-41A7-8323-374C-ECFE

Regards

[justdiag]

Good morning, everything is done offline same as before except when you need to use on-line functions and there account is needed... all same as before.

Name : cartechnology.co.uk
Key:
BLJ9-081N-Ifj6-ZESu-HHqQ-VJSI-dQf0-u5Lm-fSJP-tOJY-dc5q-Ij69-JvSn-EWUR-CkB7-0iCK-CzVv-qOCk-SQz4-Tc7f-IaiA-8XHZ-HJE1-z48G-nIMW-qVUV-DUf4-J+HR-0+2i-SNmd-XWMq-QNJe-ZfDu-hpix-5JgY-R0tp-Hq7z-lBS=-s0gHxJu

[isdochegal]

hi
Does the ODIS10 diagnostic vehicle must enter a GEKO account?

Yes 

NO! Not with this CT-Patch! Works like 9.1 offline.

[alexturbo]

Hi,
please a key for my HWID: 25E0-1CE7-4090-1745-2598-F081-5A45-5523
thank you
best regards

[justdiag]

Name: cartechnology.co.uk
Key:
BLI9-081N-Ifj6-ZESt-4iOj-b6zp-noz2-gZna-bgn9-5hEO-U0Kv-A0nU-SNgW-f6UU-iP7i-AKr7-YBfa-VYsk-vHHL-GFvM-Gcym-OckR-7BMO-5Pww-VoBR-v6v4-yICm-AXw1-kTAr-7sGt-yyYi-N0mN-SI=3-H444-4Jje-nTbx-Vp5A-0bng-D9d8iuY

[alexturbo]

I have problem after update Odis-S 10, now Odis-E 14.1 doesn't work because of ODS2508F. Because MCD server is updated. How to update MCD server in Odis-E 14.1 or reinstall old ones?
thanks

[cicoe]

I have problem after update Odis-S 10, now Odis-E 14.1 doesn't work because of ODS2508F. Because MCD server is updated. How to update MCD server in Odis-E 14.1 or reinstall old ones?
thanks

All the time that I have updated only Service, I have then trouble with Engineering, I'll suggest to uninstall both and all drivers and MCD server related, then install Service then Engineering.