Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Xentry 09/2018 Offline SCN coding help needed
25-10-2022, 02:52 AM,
Post: #1
|
|||
|
|||
Xentry 09/2018 Offline SCN coding help needed
I'm trying to make my Xentry 09/2018 working with Offline coding but without any luck. I need to finish installing a replacement conductor plate in my 2005 S500 with 722.901 transmission. I already made tho donor conductor plate virgin and was able to transfer the data from the old conductor plate. However, I'm unable to save the EHS number because it requires the offline SCN coding. My Xentry has only Online SCN coding. Can anyone help me to get it done, please ?
I'm also looking for the file 0004483310 which was used to program the original conductor plate. |
|||
25-10-2022, 03:05 AM,
Post: #2
|
|||
|
|||
RE: Xentry 09/2018 Offline SCN coding help needed
teamviewer ?
vin,tcu partsnumber,sw number need |
|||
25-10-2022, 07:15 AM,
Post: #3
|
|||
|
|||
RE: Xentry 09/2018 Offline SCN coding help needed
As @mercis, more data is needed. You do not need DAS Offline, it can be done with Vediamo and DAS Development but it is not ideal to connect with the old TCU, extract the relevant data and adapt the surrogate TCU.
|
|||
15-11-2022, 02:05 AM,
Post: #4
|
|||
|
|||
RE: Xentry 09/2018 Offline SCN coding help needed
Hi all. I'm trying to program 722.920 transmission in my 2005 S500. The electronic module was bad and I got a replacement. The EHS number stamped on the side of the valve body is 2202701106 but in the EPC the part number is 2202703106. When I try to enter in Xentry the 2202701106 number it comes as incorrect. Should I use the number from the EPC ? I guess that this is my only option. Also, I need some data to complete SCN Online programing. Can anyone help me Please ? I will appreciate very much.
VIN: WDBNG75J15A443172 SW: 0004483810 HW: 0335456632 SCN: WDEH EHS: ? |
|||
15-11-2022, 09:38 AM,
Post: #5
|
|||
|
|||
RE: Xentry 09/2018 Offline SCN coding help needed
(15-11-2022, 02:05 AM)zdzich Wrote: Hi all. I'm trying to program 722.920 transmission in my 2005 S500. The electronic module was bad and I got a replacement. The EHS number stamped on the side of the valve body is 2202701106 but in the EPC the part number is 2202703106. When I try to enter in Xentry the 2202701106 number it comes as incorrect. Should I use the number from the EPC ? I guess that this is my only option. Also, I need some data to complete SCN Online programing. Can anyone help me Please ? I will appreciate very much. Which Version VGS Board that you use? For Version 3: EGS No.2202702706 SW:0029029900 SCN:YE1A For Version 2: EGS No.:2202701906 SW:0084489710 SCN:XG5V These should be fine. |
|||
18-11-2022, 05:54 AM,
Post: #6
|
|||
|
|||
RE: Xentry 09/2018 Offline SCN coding help needed
(15-11-2022, 02:05 AM)zdzich Wrote: Hi all. I'm trying to program 722.920 transmission in my 2005 S500. The electronic module was bad and I got a replacement. The EHS number stamped on the side of the valve body is 2202701106 but in the EPC the part number is 2202703106. When I try to enter in Xentry the 2202701106 number it comes as incorrect. Should I use the number from the EPC ? I guess that this is my only option. Also, I need some data to complete SCN Online programing. Can anyone help me Please ? I will appreciate very much. Which Version VGS Board that you use? For Version 3: EGS No.2202702706 SW:0029029900 SCN:YE1A For Version 2: EGS No.:2202701906 SW:0084489710 SCN:XG5V These should be fine. [/quote] Thanks for your response. I found from Mercedes dealer that for my car the valve body superseded part number is 2202701206. This is the number I used to program the TCU using the SVCI2020 programer. I can also enter this number using Xentry correction programming function. It works so, what is left is the SCN Online coding which I can not do because I have no access to the Mercedes system. If I had the coding strings I could enter these numbers manually. The first picture is the original TCU and the second is the replacement TCU that needs SCN Online coding |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content