[NTec]

Hi to all. 

I have here a 48v. Lithium battery from a Volvo mild hybrid car who has had a crash and I need to reset crash memory from battery BMS.
I don't know where is crash memory in BMS or how to read it. 
Can anybody give some help. 
Thank you.

[bolonc]

Use VVDIPROG to read CY15B128 and write to a good file.

[NTec]

Than you.
Can I read it with upa or minipro?
Can I use some equivalent model?

---

Looking datasheet pinout is the same as M95128
Is possible to read así it?

[bolonc]

Yes, if you don't have VVDIPROG, you can use 95128 to read.

[NTec]

[attachment=156735]
Ok.
I update the progress till now.
I tried to read with minipro as 95128 but I can't get a good read.
The same with xprog, seems to read but after reading all is FFFF...
So, not a good read.
I get quite a bit success with upa reading it as a 95160 (I can't find 95128 in upa) I know the size is not the same but by this way I can read something.
After some more attempts I read it as a 25C128 who has the same pinout and since as original.
Can someone help me to read this in the correct way or tell me if is possible to do something with the file attached?
Thank you

[NTec]

Anybody has an original file for this?

[bolonc]

You can try this file....

[mechanior2686]

I do it after obd or after bench it's a waste of time to open

[NTec]

Use VVDIPROG to read CY15B128 and write to a good file.

You can try this file....

Thank you. 
I'll try

---

I do it after obd or after bench it's a waste of time to open

OK. 
But I don't have here the car. 
Just the battery... So I have to do it by this way