[mialczek]

Hi!
Car Audi A6 transmission VL300  01J 927 156 HT.
I need to transfer immo from the original gearbox controller to a new [used]. 
There is a difference in the size of the eeprom memory. The original is 2kB and the new one is 1kB.
The number of both controllers is identical: 01J 927 156 HT. 
Does Flash also have to be taken from the original?

[lupu_sandu]

One VL300 is WFS4(a6) one is WFS3(a4).
You cannot transfer

[sixcode]

HT to HT clone works 100% just depends what tool you use

also there is no immo in HT units only JG, but you need the good software and in your case ori is 4F0910155M donor is 8E0910155S witch is for a 7 plate transmission


edit:
also i did check you ori one with my backups and its not ok so if you write the flash file the way it is you will have errors on working

[mialczek]

HT to HT clone works 100% just depends what tool you use

also there is no immo in HT units only JG, but you need the good software and in your case ori is 4F0910155M donor is 8E0910155S witch is for a 7 plate transmission


edit:
also i did check you ori one with my backups and its not ok so if you write the flash file the way it is you will have errors on working

I used UHDS for reading.
Thank you gentlemen for the information.
So I'm looking for another driver.