Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Fob not working remotely after FEM ISN change
|
22-09-2023, 16:03 PM,
Post: #1
|
|||
|
|||
|
Fob not working remotely after FEM ISN change
So guys part 3 of my trouble with this car,
After setting donor ecu isn to FEM, had to do fresh immo, so add new keys, I added new key, sucesful, car start but only when holding key close to the steering column, no lock/unlock. New battery in fob etc. I tried 2 different new keys, also original key virgin and reapply, nothing. Decided to try different FEM, even changed frequency from 434 to 868 and added another key, still same. ANy ideas? tools: ACDP and CGDI |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
22-09-2023, 18:41 PM,
Post: #2
|
|||
|
|||
|
RE: Fob not working remotely after FEM ISN change
90% of the tools cant refresh 434 keys correctly
All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
|
|
22-09-2023, 18:49 PM,
Post: #3
|
|||
|
|||
|
RE: Fob not working remotely after FEM ISN change
I agree, in my experience original keys virgined don't work remotely. Use new blank keys from trusted source.
|
|||
|
|
|
22-09-2023, 19:13 PM,
Post: #4
|
|||
|
|||
|
RE: Fob not working remotely after FEM ISN change
send me which huff key u have and i will send u corresponding files to virgin with
All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
|
|
|
23-09-2023, 02:38 AM,
Post: #5
|
|||
|
|||
|
RE: Fob not working remotely after FEM ISN change
Ista has a procedure where you can test antennas, have you checked it ?
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
