Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Poll: Which version do you use? You do not have permission to vote in this poll. |
|||
ISTA/D using admin client | 65 | 29.41% | |
Standalone ISTA/D Rheingold | 156 | 70.59% | |
Total | 221 vote(s) | 100% |
* You voted for this item. | [Show Results] |
Rheingold Standalone 3.51.25
19-09-2015, 17:12 PM,
Post: #40
|
|||
|
|||
RE: Rheingold Standalone 3.51.25
Very easy to do it
Install the drivers for 0403/0000 ( insert a new line in driver .ini with this vid/pid 0403/0000 then you can instal. The drivers and tool will be recognized in the Device Manager ) Then use MProg , First I flashed with default ept ( vid/pid 0403/6001 ) file that you find it in MProg. After this I flashed again using D-CAN ept file ( the one I shared above ) Now if you have this issue then do not use a higher ftdi drivers version. I'm using 2.08.28 even my tool it hasn't this ftdi issue with newer drivers but I still use this version of ftdi drivers If there you cannot see the vcp ( virtual com port ) and only usb serial convertor then go in the driver properties and set the VCP Then a virtual com port will be assigned. After this you can change it to com 9 and latency 1 Now "voila" you have your tool working again Good luck |
|||
Reputation: +1 - hulahans [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content