[vampircek01]

Hello.. Please I need help..my BSI unit its "half dead" (rear w.heat, electric Windows,rear wiper wont work..front wiper works only on 3.speed) my question is can I replace BSI unit with other same type "Siemens" same engine 1.6 or do I need program it unit befor or after I plug in car new unit.

Is it some program for reset BSI unit maybe.. because I cant do reset BSI in a most common way thats writen on web:

Before unplugging the battery, turn off all gadgets and lights, closing all the doors and unplugging any kind of diagnostic tool. The drivers side window has to be kept open for any kind of requirement.
Turn off the ignition and take out the key following which unplug the battery after an interval of 3 minutes.
The BSI needs to be taken to Sleep mode or Active Economy mode, during which nothing in the vehicle should be operating. Even the bonnet should not be opened that time as it can ‘wake up’ the BSI if the vehicle has got an alarm installed. For batteries under the bonnet, the bonnet should be opened and left up before allowing the BSI to go to Sleep Mode. During this 3 minute interval, use of any remote control central locking gadgets for other vehicles should be avoided in the vicinity of the concerned vehicle.

Thanks... E