[ROD-BENDERS]

Hello, I need your help with this one EDC17C06, the car had dpf off and I only made EGR off with ASC Equipments program, only issue is that the error for EGR returns as shown in the picture '4501' it's the 'equivalent of 'P0401' if that helps you find it.

Although I have paid subscription to ASC their solutions don't seem 100% tested, on diagnosis I can see EGR duty cycle at 4% when idle but while revving the car over 3000rpm it sometimes changes for couple of seconds to 60% while returning to idle so I'm not certain egr is fully disabled but hope the fault code can be removed.

Thank you big time!

Egyclick

Here are 2 files.

I have run your file through my genuine ASC programs, and your egr was successfully removed without issue maps off dtc's deleted.

Then I tried to run it through the dpf remover, and the program clearly showed that the DPF is not fully removed by your software but it could not proceed with a full removal because DPF strings are missing no doubt removed by your other soft.
I cannot do anything more without having your original file.

I made 2 files for you; in the second file I also removed the dtc P0401 that you mentioned.

Your file is clearly labelled "swiftec" which is not ASC. The modified ASC program being offered elsewhere works well on some ecu, but does not work anywhere near as well as the genuine soft, the same is true about almost all modified softwares.