[apoelistas]

Could u share your driver 1.4.8 for honda?

http://cartechnology.co.uk/showthread.php?tid=3411

Love you not

Just some troubleshouting:

1. If you have X-horse 3 in 1 with 1.4.8 firmware, you have the last firmware of the original X-horse and you are the KING. The cable from the original X-horse 3 in 1 cannot be removed.
2. You should not try to update the X-horse firmware unless you have the non original one whose cable can be removed from the X-horse. Please dont try to update the original x-horse firmware as there is no better firmware for this. The firmware 1.4.8 is not made available and the Chinese manufacturers did not make this available over the internet to download. I asked this from them, and since they failed to supply this to me I will not disclose the x64 registry hack and manual installation procedure.
3. X-horse 3 in 1 original can be installed in a 32 bit environment.
4. X-horse 3 in 1 64-bit for toyota can be installed in a 64 bit environment though a registry hack (search internet),
5. X-horse 3 in 1 64 bit (including windows 10) for honda installation method was not made available over the internet.
6. X-horse 3 in 1 64 bit registry hack makes honda j2534 passthru app work like a charm
7. X-horse 3 in 1 64 bit registry hack and x-horse honda 1.4.8 driver with manual installation makes HDS work like a charm including key reprogramming. For firmware upgrade of Honda modules I use the J2534 passthru app which has all available updates, for Europe too.

As I said 5-6-7 for honda x64 is not disclosed. I dont want to cause problems with other hardware currently sold for Honda and cost 400 euros or cause the price of X-horse 3 in 1 to go up due to x64 software support. X-horse 3 in 1 original has hardware as good as the 400 euro offering though has no new software support. The HIM is much slower than the X-horse 3 in 1 and the price for the momemnt is the same.

I am not willing to support X-horse 3 in 1 x64 for Honda, since I have no benefit to do so, though I have already given out the procedure if you wish to do it by your self. This does require registry hack, manual installation of driver 1.4.8 for honda (last driver available), and latest D2XX Driver installation for x-horse recognition.

There are 6 screws to open. Last 2 screws cannot be removed, unless you brake the mvci interface plastic label. So I was not able to supply pictures though I did see the board which is of the original type.

Mine has a QC MARK (quality control number) and of original board.

(There is a seller claiming the following though both SP70 and SP70-B look the same:
What is the difference with SP70 and SP70-B MVCI?
SP70 MVCI is original, SP70-B is copy. All of them have the same software, only different hardware. Hardware version is different. Function are the same.

So you don't know what you get. It seems that the fake is also found with a non removable cable too which also has a QC mark.

Maybe the seller supplied wrong pictures thus I cannot speak on his behalf, or are they the same but from a different manufacturer and a different price tag ??????)