[overflowpy]

Try to Change remote most_ to remote most_async_ab625 or most_async by easyconnect software.

First flash bootloader (naab)
Then program and at Last data.

After flashed cic 63 flash 62 without booting cic.

Ap90500 have made detailed manuals of this on first post.

And of course there can be broken flash memory that is not possible to flash anymore.

Thanks.. but I try all most modes to flash with the same result, I use v58 Daten files.

Other Question, The Programming mode = 12 on cic_gw it's relevant?