(07-04-2016, 08:04 AM)Buzzard Wrote: (06-04-2016, 23:06 PM)safi Wrote: Hello
after immo off if you can disable dtc P1693
EDC17C08
Safi my DTC soft does not cover this ecu.
So I looked at doing new immo off file from your original files. Although my tools do a specific immo off for this cars ecu, with DTC's removed, your files show as incompatable.
The reasons for this could be a bad read, or modifications made to the file like tuning or switches being removed who knows ?
I was able to do two new files using the EDC17 "generic" immo off method and they are slightly different to the files you are using now.
I must mention that it is so important to have clean original files when you do this work. If my two new files dont remove your DTC, then may I suggest that you ask good members Mike Service or Steich, to see if they will go manually through your file to remove the DTC.
No pass for this Safi, good luck
and when I want to write the second file int_flash he asks the cks is not supported with my tool
if you can calculated the cks advance thank you for all that you already given my thank you