[obdstart]

I have OPCOM v6, initially on 1.59, flashed by mistake to 1.45 and now it doesn't connect to car. It refuses flashing FW.
FUT says:

Code:

Number of interfaces:  1
Description: OP-COM USB V2
FTDI USB Serial: OP-COMV2
FTDI-ChipID ChipID: 0x77B464F9
FTDI-ChipID Location ID: 0x12
O***M Serial-Number (calculated): TSTR47Z6
O***M FW UPdate Code (calculated): FGVARV88
Interface opened. Handle:  188948656
Baudrate 500kBit/s
Dataformat 8N1
Flowcontrol NONE
SetChars
Timeout 5 seconds
Set DTR and RTS Low = PIC Reset
DTR low
RTS low
Wait 1 second for reset
Set RTS High = PIC running
RTS high
Wait 1.5 second, so bootloader can start FW...
RX Buffer clear... OK
FW Versions- and Interface ID- request send.
*
**
***  Interface ID Answer: 0E 00 EB   4F 49 31 32 33 34 35 36 2D 31 32 33 34   BD
***  Interface ID (ASCII): OI123456-1234
***  Firmware Version: 1.45
**
*
Set RTS to LOW = PIC Reset
RTS low
Communication closed. Handle:  188948656

Any hints on this? How to flash FW

Try use with software 120309a is much better work than mixed software 120309a+131223d