[smg_fan]

Hi all,

when I try to connect the ista-P via ENET with BMW F20, i get error 94201 and 55054 and 63014 (CASTOR) see screenshot below. I tested it with some different F21 - all the same on any car.
In the FAQ is listed: Update ICOM Firmware - but I don't use an ICOM.
I searched around in forums and find some hints:
Release battery for 20 min, Reset ZGW, switch off firewall,
Did all - but no changes.

I use the rheingold / ista links from this thread.
Ediabas 7.3.0 (was already installed before)
ISTA-P Loader 6.1F rev1
INPA, ISTA-D, Esys is working fine with the F21.

Any sugestions or hints where to search the bug?
Thanks and regards.