Posts: 4,174 Threads: 194
Threads: 194
Thanks Received: 15,217 in 2,932 posts
Thanks Given: 5,872
Joined: Aug 2015
Reputation:
11,177
RE: Honda civic 2004 U.S market
(03-05-2017, 16:55 PM)strikeforce Wrote: Got this honda civic U.S market with all keys lost, tried launch x431 and x100 pro but system says immobiliser is not normal and can't programme keys.
below is what the x431 scan tool came with
"Immobiliser system not normal
System code check:
A-3 no communicatrion between key and immobiliser unit
possible failures
1 ignition switch is turned on with a non immobiliser key
2 the immobiliser key type is different. it is not for this vehicle but for another one or for other company
3 the key failure (transponder failure)
4 the communication was not good between the antenna and the immobiliser key by influence of metal on the key chain
5 the communication was not good between the antenna and the immobiliser key by battery voltage low
6 immobiliser unit failure"
any idea how to solve this problem?
what transponder does this car use, ID46 or ID13?
what is the eeprom containing the immo dump?
below some pictures from the immo receiver attached to the key ignition lock
hi mate immo is stored in several possible places depending on vehicle. Here is a picture of what info I have that may be of use to you
All VAG immobiliser adaptations here.
Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need.