Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
My first map. (PROCESSING)
|
21-08-2017, 20:26 PM,
Post: #2
|
|||
|
|||
|
RE: My first map. (PROCESSING)
You do this using ECM?
First your "injection on throttle" is modified wrong. You modify opposite way round. Lower Load= Higher Increase High Load= Little increase. Turbo Pressure. This turbo can handle 27PSI? Again you have modified so High load is higher increase. Torque limiter can be only 1 change. From lets say 1500 RPM to 4500RPM you can increase whole by 20-35% maybe more but your choice. I would not increase rail pressure unless you know what you are doing so maybe leave rail pressure unless you really need to. Also no need to edit the (temp) turbo map. I have made you file to learn from. You can see what I tried to explain. This will be safe to use on car also. |
