Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Opel Meriva A - Need Pin from Dash Dump
24-11-2017, 08:47 AM, (This post was last modified: 24-11-2017, 08:49 AM by dave1982.)
Post: #8
RE: Opel Meriva A - Need Pin from Dash Dump
I think i have a other problem with this car.
i got a lot of faultcodes in my easytronic ECU
i think im in the wrong place, but maybe someone here can help me.
i got these codes:
P0725 - (4) Engine Speed Signal CAN-BUS Malfunction - Present
P0505 - (4) Idle Speed Signal CAN-BUS Malfunction - Present
P1895 - (4) Engine Torque Signal CAN-BUS Malfunction - Present
P1896 - (4) Eingine Torque Request CAN-BUS Malfunction - Present
P1120 - (4) Accelerator Pedal Position CAN-BUS Malfunction - Present
P1703 - (4) Brake Light Switch CAN-BUS Malfunction - Present
U2105 - (4) CAN-BUS no Communication with ECM (Engine Controle Module) - Present
P0110 - (4) Intake Air Temperature CAN-BUS Malfunction - Present
P0115 - (4) Engine Coolant Temperature CAN-BUS Malfunction - Present

(24-11-2017, 08:45 AM)Ashraf6119 Wrote:  
(24-11-2017, 08:39 AM)dave1982 Wrote:  
(24-11-2017, 08:30 AM)Ashraf6119 Wrote:  
(24-11-2017, 08:25 AM)dave1982 Wrote:  
(24-11-2017, 08:15 AM)dil6222 Wrote:  Try resetting then program smile you using opcom to program ?

i-m using opcom.
its not possible to reset.
when i try to reset, it ask for the pin.
its not possible to enter FFFF.
and then i try to enter my original pin it shows "Reset failed"

Your Op-Com can also read the pin code so double check as i told you in my first post.also check the security lock time it must be activated as you have put wrong pin codes few times so, live the ignition ON for the time showing in your Op-Com....

Can tell us what is the problem with this vehicle.........?

the problem is that the car wont start it shows the "F" in dash
in eeprom menu from opcom the dash pin is "FFFF"
its not possible to reset or program the dash.

i also have a small problem with the BCM.
programming and coding works without problems, but i have fault code:
B3058 - (0) Vehicle ID Not Programmed - Present
have tried to programm it in other car (Corsa C) and it works without faultcode.
but then i reset it and programm it in my meriva the fault code came back.

When you say you have (F) showing on your dash means is this vehicle Automatic....?

yes, its easytronic
and yes i looked for the security time, it was off (or not present)
Quote this message in a reply


Messages In This Thread
RE: Opel Meriva A - Need Pin from Dash Dump - by dave1982 - 24-11-2017, 08:47 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  opel astra 1.7 edc 16c9 senci_24 3 40 03-06-2024, 05:39 AM
Last Post: raffy haddad
XZBMW BMW C650GT bike MTA Dash or EWS problem? Vojno 3 75 29-05-2024, 13:10 PM
Last Post: raffy haddad
HVolvo Solved ✔ volvo xc60 PSCM dump error u3000 persix 1 75 28-05-2024, 05:09 AM
Last Post: persix
XZBMW e92 frm dump needed brian94 3 82 24-05-2024, 11:31 AM
Last Post: pepi
XZBMW possible to copy key data from one CAS3 to another? (xprog-m dump) vilord 3 168 24-05-2024, 07:45 AM
Last Post: johann74270
  Bmw cas3 dump repair Luci01 1 59 24-05-2024, 03:31 AM
Last Post: kuki88
  Solved ✔ Solved ✔ Opel Astra H CIM PIN please urgi 2 76 22-05-2024, 15:01 PM
Last Post: urgi
UNissan Solved ✔ Eeprom dump BCM Nissan Juke BS68 7 440 22-05-2024, 09:15 AM
Last Post: ombra
KOpel Pincode Opel Astra H EDC17C59 ? chrisi1909 5 154 19-05-2024, 09:55 AM
Last Post: dabaca
LFord Focus cabrio ESU-411 dump eyprok 0 26 17-05-2024, 10:01 AM
Last Post: eyprok

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content