[atomantmk]

Hello to all
I have a problem with CIC e90, I'm trying to bring back to V41, I followed the guide of the master ap90500. Everything worked perfectly for FLASH CIC_C63 (CI63F1)
Now I have problems with the FLASH of CIC_C62, I do not know what data, programs and in particular NAAB insert to continue the FLASH
I enclose a picture of my DATEN V41 of the CI62F1 folder for E89.
I hope you can help solve the problem.
Thanks so much.

Those files are needed for address 62:

-PABD = 08010408CI62F1.ipo (be carefully, do not choose CM62)
-P-SGBD = 33CI62F1_10.prg (be carefully, do not choose CM62)
-ECU-adress = 62
-Data = A9257174
-Program = 9257170
-NAAB = H020270_0202J5

for address A0:

-PABD = 08010408CIA0F1.ipo
-P-SGBD = 33CIA0F1_10.prg
-ECU-adress = A0
-Program = 9257170

Hi,
@Atomantmk, can you correct your posts 122 & 126, because some are wrong and misslead others:
ECU address 62:
Data = A9257183.0da (assembly identif number)
Program = 9257181A.0pa or 0pb (HW number)
NAAB = H020280_0202J6.0ba
ECU address A0:
Program = 9257185
This is the only one file to flash but 390 Mo so the longest part.

For those who are in stuck with the error 211 about 63 area:
You can flash (with Icom) using the OBD_625 way in EasyConnect:
NAAB takes 1 hour to be done. CiC will reboot and after 20-30 second display the box ''Boot sector Update OK''.
Prog Data takes 1/4 hour, the is is shortest part, can be done before Prog Program part.
Prog Program is the worst ! 36 hours (4.8 Mo per hour) because this one is 169 Mo ...
This way allow to go back, then using Ista/P to have the lastest i-level.

If you read the first post everything is the same, I have done this twice on E89 without problem and in both cars CIC was dead, stucked in bootloader.
Flashing was about 100 minutes with loading files for each address.