Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW ETK (04.2018) - Mega
09-04-2018, 07:16 AM,
Post: #6
RE: BMW ETK (04.2018) - Mega
(08-04-2018, 17:11 PM)Stromag Wrote:  
(08-04-2018, 16:10 PM)bmwcare Wrote:  
(08-04-2018, 15:28 PM)Stromag Wrote:  Hello I have problems to install the Etk.
The installation stops and does not continue when I confirm the ports ..
Even the ports change to 1027 and 1028 does not work ..
Program uninstalled with Revo uninstaller and so clean Regestry with CCleaner but does not bring what ..
Does anyone have any advice?

use iso image 2018_01 to install first
then use folder 2018_04 to 'modify' or update

this also stops language problems.
always keep proper iso image for fresh installs

disable firewall/AV too or allow access
my main BMW laptop doesn't run AV or Firewall at all

Firewall, Antivirus, Defender disabled permanently.
However, ISO 01.2018 tries the same result.
Depends on "Please wait while Etk is configured"

Ports do not change during the installation, in the lower fields will already in 2024 and 2025 !!!!!!

Don't forget press [Image: postbit_thx.gif] and [Image: postbit_reputation.gif], if my post helped you.

  • BMW software remote installation via TeamViewer.
Quote this message in a reply


Messages In This Thread
BMW ETK (04.2018) - Mega - by demon68 - 05-04-2018, 16:20 PM
RE: MEGA BMW ETK 04-2018 - by igor_h - 05-04-2018, 17:06 PM
RE: BMW ETK (04.2018) - Mega - by Stromag - 08-04-2018, 15:28 PM
RE: BMW ETK (04.2018) - Mega - by bmwcare - 08-04-2018, 16:10 PM
RE: BMW ETK (04.2018) - Mega - by Stromag - 08-04-2018, 17:11 PM
RE: BMW ETK (04.2018) - Mega - by Shinoby - 09-04-2018, 07:16 AM
RE: BMW ETK (04.2018) - Mega - by Stromag - 09-04-2018, 07:28 AM
RE: BMW ETK (04.2018) - Mega - by Stromag - 10-04-2018, 16:04 PM
RE: BMW ETK (04.2018) - Mega - by samgeorge - 10-04-2018, 18:06 PM
RE: BMW ETK (04.2018) - Mega - by Stromag - 10-04-2018, 20:14 PM
RE: BMW ETK (04.2018) - Mega - by Shinoby - 13-04-2018, 16:18 PM
RE: BMW ETK (04.2018) - Mega - by Oldschool - 11-04-2018, 08:08 AM
RE: BMW ETK (04.2018) - Mega - by Stromag - 11-04-2018, 08:14 AM
RE: BMW ETK (04.2018) - Mega - by gente - 11-04-2018, 13:10 PM
RE: BMW ETK (04.2018) - Mega - by Oldschool - 11-04-2018, 14:31 PM
RE: BMW ETK (04.2018) - Mega - by bmwcare - 11-04-2018, 15:11 PM
RE: BMW ETK (04.2018) - Mega - by Oldschool - 12-04-2018, 07:50 AM
RE: BMW ETK (04.2018) - Mega - by Node - 11-04-2018, 15:21 PM
RE: BMW ETK (04.2018) - Mega - by bmwcare - 12-04-2018, 08:09 AM
RE: BMW ETK (04.2018) - Mega - by E46-Cabrio - 12-04-2018, 11:09 AM
RE: BMW ETK (04.2018) - Mega - by bmwcare - 13-04-2018, 08:20 AM
RE: BMW ETK (04.2018) - Mega - by noobontour - 13-04-2018, 16:57 PM
RE: BMW ETK (04.2018) - Mega - by Shinoby - 14-04-2018, 07:32 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW [MEGA] /// ALL ROAD MAPS EUROPE -> 2024 NEW + *KEY-TOOLS* hashtagmaster 214 70,824 6 hours ago
Last Post: hashtagmaster
  [MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 113 37,805 23-05-2024, 15:42 PM
Last Post: hashtagmaster
  v4.47.31_PSdZData - Full Version - MEGA luntik 0 114 23-05-2024, 14:31 PM
Last Post: luntik
XZBMW ISTA+ 4.47.3x Install Files - MEGA shawnsheridan 2 662 22-05-2024, 23:03 PM
Last Post: ctgy8923
XZBMW PSdZData 4.47.31 Full & Lite - MEGA charlesjyw 1 161 22-05-2024, 08:25 AM
Last Post: jeroenbmw
  Road Map Europe West MOVE 2024 [MEGA] pcp1234 0 71 18-05-2024, 19:38 PM
Last Post: pcp1234
XZBMW Road Map North America EVO 2024-1 [MEGA] pcp1234 0 74 18-05-2024, 19:36 PM
Last Post: pcp1234
XZBMW DELTA FILES 4.41.4x to 4.47.2x MEGA DOWNLOAD Mathijshee 2 285 15-05-2024, 11:42 AM
Last Post: Mathijshee
  v.4.33.31_PSdZData - Full Version - MEGA (7z Ultra high Compression 66.5GB) tokenmasterhk 9 1,489 14-05-2024, 22:45 PM
Last Post: AutoExe3219
XZBMW CZ_SQLiteDBs_4.47.20 on MEGA smahel 0 70 10-05-2024, 19:36 PM
Last Post: smahel

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content