Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[SOLVED] BMW BIKE S1000RR 2018 ESYS ERROR G188
25-04-2019, 13:44 PM,
(This post was last modified: 29-04-2019, 09:47 AM by beemered.)
Post: #1
|
|||
|
|||
[SOLVED] BMW BIKE S1000RR 2018 ESYS ERROR G188
We try to connect to S1000RR 2018 (this one has 16pin obd like car) with ESYS and getting the error:
Connection check failed. Gateway/ECUs are not correctly connected or not responding. However Functions using the ODX-Data can be used. [G188] We use ESYS 3.27.1 with latest psdzdata 4.16.40 and original ICOM NEXT (tried ESYS 3.33 also). We tried all possible connection options in ESYS with ICOM IP (via ICOM/D-CAN, ICOM/Ethernet, gateway URL). We tried with ICOM reserved and ICOM released in iToolRadar. Firewall off, wifi off and all other network adapters disabled. ESYS is set to motorbike in options. ISTA is connecting without any problem. Any suggestions what to try next? Thanks. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[SOLVED] BMW BIKE S1000RR 2018 ESYS ERROR G188 - by beemered - 25-04-2019, 13:44 PM
RE: BMW BIKE S1000RR 2018 ESYS ERROR G188 - by Vojno - 26-04-2019, 15:54 PM
RE: BMW BIKE S1000RR 2018 ESYS ERROR G188 - by karlihuber - 26-04-2019, 18:13 PM
RE: BMW BIKE S1000RR 2018 ESYS ERROR G188 - by aleksandrw - 26-04-2019, 19:35 PM
RE: [SOLVED] BMW BIKE S1000RR 2018 ESYS ERROR G188 - by beemered - 29-04-2019, 09:50 AM
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content