[ntuner]

Used tms modules need to be coded to car and then you need to initialize them in ista. After that DRL starts to work.

Fuse 127 is only for lamp...right or left I dont remember. You have problem with wiring to lamp ( from that fuse to lamp) or internal lamp wiring problem. To test, try connect right lamp to left side and check the fuse, then coding etc

Yes I’m well aware used modules need coded. Problem is I can’t even connect to TMS either with esys or ista. I did try right headlight on the left side and everything works fine. I’ve spent about 3 days on this turns out the TMS has corrosion from flooding most likely which is why is shorting. 
Then the headlight itself is shorting too because I put the good TMS from passenger headlight and doesn’t burn the fuse 127 anymore but still not working. The lights blink for a split second then turn off from shorting. This is a Ebay headlight so it’s being returned.

After swaping tms module you initialize led in ista? When lamp is not initialize it only blink leds and turn off...

Yes already did that multiple times. When it blinks I also get the faults on the dash. Even tried injecting the cafd in the good TMS then initialize in ista, still blinks and headlight fault on the dash..