[sambir]

put ff on all vin and code it with esys

I removed 1 longvin @ 0E0 and 0F0
short vin @ 2F0
short vin @ 2EC0
short vin @ 30C0

Connected the kombi, @ first red dot was gone but yea cafd was removed.

injected new cafd and coded the kombi, red dot came back

Checked the chip and longvin was still FF, all other vins were set again to target car.

Then went back to the bench and flashed it again to see if longvin would change and dot will go away, but no after flash still red dot.

Removed it again to check and all vins on all given location seem to be target vins. So it must be on another chip also? or encrypted on this...