[donke]

Here my findings about security token not on a ix3, but on a G80 M3 5/2022.

First the short answer.
1. still code modules (YES, but no coding of secured ECUs)
2. Still program modules (YES, but no coding of secured ECUs)
3. None of the above (you can still code some ECUs, also program them)

Here some more details on my tests with the M3:

I've got the security token warning during readout with ISTA. After ignoring the warning I could do a full diagnostics but I also wanted to start an i-step update.

This istep update with ISTA did not work (it did not start, because of the secure token).
So I tried a bit to find out, which ECU was relevant for the error msg.

On the M3 it was the VTG ECU (it was named not VTG, but had an other name on the M3, but I'm sitting on my other laptop at the moment, I can check the correct name tomorrow - To find out which ECUs are secured, you can of course try to program only one single ECU and then wait until one ECU will not work, or you read it out with esys).

If I deselected the Verteilergetriebe I was able to update all other ECUs. Also the complete coding of all ECUs did not work for me, only if I deselect the secured ECU. Also for "Gesamtkodierung" I had to deselect the secured ECU.

Everything else worked for this test. After all the tests I wanted to bring the m3 to a complete I-Step update and I wanted to complete a full reprogramming of all ECUs (also for the VTG). For this I wanted use an official AIR/ASO account. But there I've got older software as on my ISTA installation, so I had to wait some days until I could update the complete car.

So it could be possible that you can program or code some of your ECUs with ISTA, but there will be ECUs without coding possibility (with an offline ISTA installation) at the moment.

On a iX I've read out a few months ago, I guess the following ECUs are secured (most of the electric powertrain ECUs - HVS, CCU and I guess but I*m not 100% sure, if also the electric engines were secured (TEE and TEE2), I will also check my logs tomorrow and update the post then.