[ikrom]

Hi there

Here's Audi A6 2012 immo5 (ecu-tcu-bcm2 immo) with dsg dl501 gen2 0b5 changed.
Now car starts, but in dash SAFE and writing 
"stop the car put to "P" and switch off engine" and gearbox not selecting , can't drive.
Because gearbox was burned, and changed to another one. Now need to adapt tcu immo with bcm2.

So BCM2 immo data copy to -> tcu immo.

Here attached full read from bcm2 & full read from tcu.

Thanks !

UPD :
a6 gearbox DL501gen2_0b5.rar - is new tcu full read (now installed)

old ori gearbox.rar - is old own car tcu (burned).