[david99]

Works fine on my genuine VAS 6150C. Installation without problems and after installation also all fine too.

can u share able how u can updating it?? i have 1 ssd it's original win7 & 2nd i can updating normal window 10 but NOT this  Windows 10 USB - VW USB Stick Upgrade

-i have complete download image iso but not sure how i can updating it, i hope u can share detail how??

-i try rufus ' Create bootable USB drives ' and still not see how i can install this win10 ' i can updating by normal win10 down load straight from microsoft into my vas 6150c, but when i log in Bios i enter password & not anle see there any 'boot' for this usb or recovery  partition ' for this win10 is there any one can help thanks a lot, if need moneys for donation i will happy to fund it

Hi,

You need to clean your USB stick, I'm personally doing it via diskpart like this:

1. open diskpart in cmd
2. list disk
3. select disk x (instead of x use number which correspond to you USB drive)
4. clean
5. convert gpt
6. create partition primary
7. format fs=fat32 quick
8. assign

But be careful if you do not know how to properly use diskpart and you will select different disk you could end up with cleaning some incorrect drive!

Then copy all data from ISO - 7zip of VW image to that USB drive. After that put that USB drive into USB of CF-D1 - VAS6160 enter bios and select usb drive to boot from, before be sure you have enabled UEFI Boot.

For installing to any other machine it would be tricky as this ISO includes only drivers for panasonic machines, but you could try by editing ts.xml in Deploy\Control\VW-TS-11 on VW media.

David