Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Scanmatik 2 pro with ISTA/P
15-02-2023, 18:35 PM,
(This post was last modified: 15-02-2023, 18:37 PM by micarrole.)
Post: #5
|
|||
|
|||
RE: Scanmatik 2 pro with ISTA/P
The problem solved myself.
If you want using J2534 device, following this steps. 1. Run BMW PassthruD in Administrator(Important!!!) 2. Choose the J2534 device you want and save it 3. Open your file explorer 4. Move to C:\EDIABAS\BIN (default) 5.Open EDIABAS.INI in notepad 6. Edit configuration interface = STD: passthruD (default STD:OBD maybe..) and save it! 7. Launch ISTA/D and move to Configuration -> Interface 8. Select EDIABAS.INI and apply it. Do not select "Passthru" 9. That's all. Enjoy |