[VAGPRODRIVE]

Hello everyone.
 
I need the help of some expert in Control Unit coding, and see if there is any solution for this specific case.
 
The problem is in an Audi A4 8K B8, this car comes from the factory with an Electric Power Steering (8K0909144B) out of necessity the electric steering had to be changed for a mechanical one (Hydraulic, which is mounted on the Audi A4 2012).
 
The car mechanically works well with the hydraulic steering, the problem is, of course, that he still thinks that he still has the electric steering mounted.
 
I thought that modifying the list of Installed Units in 19 Gateway Can and unchecking 44 Power Steering would be enough, but no, I still receive errors from the other control units that do not have communication with the steering.
 
The ABS has also lost the coding (When I scanned the car it no longer had a coding) I imagine that until all the modules are coded correctly, it will not accept any coding

Is there a way to fix this?

What other module should be coded, or maybe a control unit needs to be updated with other software?

Perhaps this is total nonsense and there is no way to fix this.
 
Next, I put all the information that can be of help
 
Audi, 2013, CJEB 1.8l TFSI / 125kW

 

44 - Power steering (Original Car)

Hardware Part Number: 8K0909144B

Parts No. :8K0909144P

Hardware version number :H43

Software version number :0510

in block 03, try coding 050540 or 051500. in block 17 and 01, try to decode block 44. there is also a decryption of bytes and bits