[hansolo]

Hi guys,

I got it working on my own.
Here the solution in case somebody in the future follows the same retrofit path.

In fact, besides the correct ECU coding there are just 2 parameters, which have to FDL coded to get top-view with PMA2 working.
1. VO code the ECU TRSVC with original FA (F20 LCI2, with 3AG),
and then FDL code the "DID41A3 Default TV Inhibit" parameter from "TV_OFF" to "TV_ON"
2. VO code the ECU PMA2 with original FA (F20 LCI2, with 5DP),
and then FDL code the "TVC" parameter from "nicht verbaut" to "verbaut"

In my case the ECUs needed to go to sleep and after a restart everything worked as intended.

Best regards,
Matt