Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW E83 A1 error - MRS: No message from DSC ...
16-12-2023, 18:14 PM,
Post: #19
|
|||
|
|||
RE: BMW E83 A1 error - MRS: No message from DSC ...
Unfortunately, I had to remove the exhaust manifold from the engine - that banjo bolt left inside was not moving at all. Once removed from the engine - i was able to cut new threads with a tap.
First I worked with M11x1.5 to try to remove the remaining piece ... until some point it worked, and then i have used the final one M12x1.5 - to remove all the remaining pieces from that banjo bolt. Off course, lots of stress and swears as it was difficult ensuring the tap was square and properly started to avoid cross-threading the manifold. Finally i clean it. Any idea what should be the torque for that banjo bolt - i cant find it in ista ... Thank you! |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW G8x Coolant Temp error | Airbus | 3 | 71 |
30-05-2024, 23:09 PM Last Post: krug |
|
BMW G30 D19DE7 and D35903 error codes | flausatu | 0 | 46 |
30-05-2024, 07:12 AM Last Post: flausatu |
|
F33 EPS repair pack FSC error | RuleNormaliai | 8 | 806 |
23-05-2024, 12:59 PM Last Post: Flash_W_88 |
|
Mini F55 EPS 4822F7 error | Alyn546 | 19 | 343 |
22-05-2024, 22:09 PM Last Post: Node |
|
BMW EOS tester (IMIB) call-up error | fatfash | 7 | 349 |
11-05-2024, 18:13 PM Last Post: fatfash |
|
Newly installed esys with warning message | arthur101 | 4 | 323 |
11-05-2024, 07:57 AM Last Post: Node |
|
Error SIG_CHECK_FAILURE | Jalami | 16 | 2,046 |
10-05-2024, 07:39 AM Last Post: grizzle |
|
ISTA 4.47 test plan and error delete not available | bmwm3power | 7 | 554 |
04-05-2024, 15:49 PM Last Post: bmwm3power |
|
xdrive off with esys without error in dash | dankocg | 15 | 3,373 |
04-05-2024, 11:55 AM Last Post: kami2k |
|
Esys error message only on EPS. ''Failed to get CAFs for SWE'' | arthur101 | 2 | 175 |
25-04-2024, 22:48 PM Last Post: arthur101 |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content