Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Peugeot 4007 EDC16CP39 working DPF solution required
21-12-2023, 07:58 AM,
Post: #5
|
|||
|
|||
RE: Peugeot 4007 EDC16CP39 working DPF solution required
(21-12-2023, 07:21 AM)YGRemaps Wrote:(21-12-2023, 06:38 AM)Carremapper Wrote:(20-12-2023, 22:07 PM)koyot Wrote: resset dpf strateg That's also possible, however there is no any single bullshit DTC switched off (so I should have seen if there is any other issue with the engine itself, which couses the limp), also the counters are still alive regarding DPF functionality, which is not always a problem, but I would think of a correlation between the unexpected, continous limp & counting DPF parameters on diag. Nevertheless, if both software should have been working, I will start to search for any other possibility to find out what's limiting. Regards Carremapper Kess V2 EU 5.045 / PCMFlash + SM2PRO / Autel MK808 / Launch X431 / VCDS / VCP |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Peugeot 4007 EDC16CP39 working DPF solution required - by Carremapper - 20-12-2023, 21:21 PM
RE: Peugeot 4007 EDC16CP39 working DPF solution required - by koyot - 20-12-2023, 22:07 PM
RE: Peugeot 4007 EDC16CP39 working DPF solution required - by Carremapper - 21-12-2023, 06:38 AM
RE: Peugeot 4007 EDC16CP39 working DPF solution required - by YGRemaps - 21-12-2023, 07:21 AM
RE: Peugeot 4007 EDC16CP39 working DPF solution required - by Carremapper - 21-12-2023, 07:58 AM
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content