[apoelistas]

I did download it The guy who has given it at another site TizWaz has given a PHOTO OF THE Xhorse 3 in 1 which this firmware applies to. It is applied to THE FAKE XHORSE because the cable is removable (usb). So I dont recomend that you use it on original X-horse 3in1 because it has different board thus also a firmware. Use it at your own risk. My opinion is if it is not broken dont fix it. Firmware 1.4.8 should be good but I have not tested it yet. GHowever another chinese supplier is selling the same Xhorse 3 in 1 I have, (which is supposed to be the original Chinese Xhorse) with firmware 2.0.4 (but I dont believe him, I think it is the Xhorse for toyota which is a different scanner). So I am confused. Maybe this firmware applies to the original 3in1 xhorse. We need Dimitar to expalin. Can you please advice Dimitar?????

Also the X-horse manufacturer website (www.x-horses.com) is not existent. It is for sale. Maybe all our X-horse scanners are a very old stock. That is the reason that online firmare update does not work. I tried wayback machine but no luck in getting the firmwares. I only found at their websiste, through the wayback machine, the "VAG KM & IMO V1.8 beta.exe" XHORSE software which uses latest firmware 2.0.6 (I donwloaded the program opened it and said latest firmare 2.0.6) but it is only applicable to VW/Audi Cars.

https://web.archive.org/web/201307191514...orses.com/


I can send you the MVCI001200250_2.0.1.mfu fimrware if your scanner is bricked. There is a small possibility that the firmware is for the original Xhorse.

The firmware could also had its name changed. The attached firmware was version 2.0.1 but could also be a 2.0.5 or another version and someone has renamed it. I think that the flash has to be performed with either the original file name or your scanners firmware name. I dont know I am just guessing because I have read many with failures on another site supplied by someone called TizWaz (2.0.1 firmware). I have not tried it yet. I also tried to hex edit to see if there is a firmware name but there isnt.

For example the original firmware for 2.0.5 is : MVCI001000250_2.0.5 (as seen in youtube firmware x-horse update by carcodereaders.co.uk who dont want to share)
So if you have bricked your scanner try the above name or
or as a second option try your firmwares name_2.0.5 as read from the mvci firmware update tool.

Also try with original name and hope that the firmware is correct and will update correctly.

Also be sure that you use the firmware update tool 1.4.8 only.

Please keep us posted and let us know of the actual firmware that the firmare update gives on your firmware mvci update tool is it 2.0.1??????

If any finds the last versions for the original X-horse 3 in 1

2.0.4
2.0.5
and 2.0.6 please let us know.

The chinese seller (ZLS Tech Auto Diagnostic Tool Supplier) and his supplier are refusing to send me the latest firmware. That is to say they dont support their products, which is a bad marketing and bad client attitude and bad customer service. I have firmware 1.4.8 (xhorse mvci 3in1 Device SN MVCI001004696).

http://www.auobd2.com/mvci-toyota-tis-ho...e-341.html
The seller auobd2 has said that his xhorse firmware is 2.0.4 and is the original 3 in 1 xhorse. He has also sent me a picture to confirm the firmware version 2.0.4.

The firmwares name that was attached to this thread was MVCI001200250_2.0.1.mfu. Use it at your own risk unless you have the fake usb Xhorse which might be a good idead to get more capabilities out if it.