[TIGHTFIN]

Hello everyone. BMW G01, transitional, BDC2, MGU ID7.

The main battery was removed on the car and under the hood. After the locksmith work, the car was connected, they started to do dїдgиo5тїcs. All blocks that are on FlexRay are not connected: there is no connection with DME, DSC, EPS, ACSM, VTG, GSD and VDP. After that, I connected BDC2 and DME to the bench (on the table) - there is no connection via FlexRay. I threw another BDC, there is a connection on the table. Of course, it's about BDC - it doesn't generate Flexray.

Bought one-in-one for HWEL and HWAP BDC 2, completely cloned ACDP2, the key works, everything works fine, Flexray units are connected except GSD and VDP. After cloning BDC, updated together with btld BDC and BDC_GW (GATEWAY), with Checkmarks Update VCM and Update MSM. Nothing helped. All FlexRay units are connected, except GSD(GHAS), active reducer and VDP - suspension control. All other units are connected after replacing the BDC, but these two units are not connected. Whatever you tried, the ports are open in Tool32 - ZGW. I also did initialization through i5тд and Tool32. I also opened the ports manually. SVT edited, manually added. Nothing helps.