[mojsterb]

Now I have PIN and not working Clip, so project paused.

But I have problem with remote programming. This procedure doesn't work for me:

Code:

1. Turn Ignition OFF.
2. Press the central door locking button for more than 5 seconds. Note: the door should lock then unlock.
3. When this happens, 10 seconds is allowed and the immobiliser warning light illuminates.
4. Press the remote control once, the doors should lock and unlock.

I pressed central locking button for 5 sec, but nothing happens. Any help? Maybe is problem that is missing driver side locking actuator?

Https://www.youtube.com/watch?v=noJFvlJvLRY here U have all about Ur problem, good luck

This is for newer models, for old models is old graphic interface of Clip software and I don't know if have same functions.