[dynamicsteam]

Hi file work ok 100/100

Steering working OK again, many thanks I have a configuration fault. I have programmed VIN and calibrated steering angel sensor which now shows status 4 which is correct. Anything else I have to configure?

Mike

Try with this software

hi which adapter need to use ,thanks

clip

I have worked out the configuration error. I will leave steps here incase others have same problems.

With virgin steering file loaded you must do following with clip tool.

Enter VIN number
Calibrate steering angle sensor
Program size of tyres and engine type. In my case a K engine 195 x 60 tyres

After doing this steering working and no fault codes

Many thanks to everyone who helped !