[Stiffmaster]

WinKFP ignores the flash counter. In the worst case, it can't update AIf.
Btw, if you have bin. Can you write that ecu in Bootmode?

Hi mate! I'm with the ecu on the bench ! Is not responding to winkfp programming at all ! In no spdaten can find any of the above listed partnumbers! Xprog, vvdi cannot read infineon tricore ! Manage to read mcu bin file with autohex tricore , and can write back easy another dump then isn back into it an job done!

MSD80,81, no problem with Winkfp on bench.
Did it already. Maybe connection is wrong.