Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E9x 8HP Transmission Problem with DSC
|
03-10-2017, 03:31 AM,
(This post was last modified: 03-10-2017, 03:41 AM by mr_nitroz.)
Post: #2
|
|||
|
|||
|
RE: E9x 8HP Transmission Problem with DSC
Nice retrofit, are you sure that the problem is in DSC? If yes I would try different SW with WINKFP into DSC. Or DSC unit from car that had 8HP transmission from factory.
Did you use 8hp45 or 8hp70? Did you have to do some coding of EGS? |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
E9x 8HP Transmission Problem with DSC - by chriscom - 01-09-2017, 06:37 AM
RE: E9x 8HP Transmission Problem with DSC - by mr_nitroz - 03-10-2017, 03:31 AM
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
|
BMW e87 LCI hralights retrofit problem | XeoN | 0 | 10 |
6 hours ago Last Post: XeoN |
| Reset for GA8P70H F10 Hybrid transmission | willisodhiambo | 20 | 2,454 |
06-05-2024, 00:19 AM Last Post: AnthonyGharib |
|
| Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,643 |
26-04-2024, 08:06 AM Last Post: smilo |
|
| pulling both paddles put transmission into neutral coding | tintoverano | 1 | 151 |
22-04-2024, 12:42 PM Last Post: raresh.tazz |
|
|
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,890 |
22-04-2024, 11:44 AM Last Post: kwat |
| BMW E60 coding problem | GarageX | 8 | 390 |
02-04-2024, 10:07 AM Last Post: GarageX |
|
|
|
Bmw 5,f10 radio problem | RobertRexhaj | 3 | 182 |
28-03-2024, 18:47 PM Last Post: Unspec |
| ISTA launcher problem | Red_bean_bun | 1 | 296 |
26-03-2024, 05:11 AM Last Post: 2013m5 |
|
| Dme Cas synchronization Problem | donjuan020 | 3 | 293 |
25-03-2024, 21:55 PM Last Post: BmwMerc |
|
| BMW e39 530d 2001 problem after MAF change | boweld11 | 3 | 189 |
24-03-2024, 22:44 PM Last Post: SkeYT |
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
