Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[SOLVED] ISTA-D Problems [SOLVED]
23-11-2017, 20:27 PM,
(This post was last modified: 23-11-2017, 20:50 PM by DNK76.)
Post: #7
|
|||
|
|||
RE: ISTA-D Problems
Install INPA and interface just like in movie
https://www.youtube.com/watch?v=m-vYe1_96Mc For interface K-DCAN USB Interface= STD:OBD obd.ini COM9 Hardware=OBD This manual should work You can skip NFS for inpa you do not need As you check INPA works it Go to the ISTA D configuration Click on the key icon at the top overlap Vehicle Interface uncheck EDIABAS default settings it should work but without the voltage it works wrong there is no erase error in the newer version i would recommend to do so http://cartechnology.co.uk/showthread.ph...153&page=2 For the F-G series ediabas 730 does not matter (ENET interface) We set the last value dealer organisation HO ICOM / ENET direct connection windows 10 are problems with the registry for serial (K-DCAN) add fix check that all ok obdsetup.exe |