Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Help change Vin In The Instrument Cluster
|
16-12-2017, 09:12 AM,
(This post was last modified: 17-12-2017, 16:24 PM by easycome.)
Post: #1
|
|||
|
|||
|
Help change Vin In The Instrument Cluster
I have the codes new and old cluster.
not apli vin in new cluster. [Adaptation - 10] Enter 050 in "Channel Number". [Read] For the following procedure, use the "Original PIN" number you wrote down earlier. 4-digit PIN Enter zero followed by the 4-digit PIN directly in the New Value field. For example, if your PIN is 1234, enter 01234. [Test] The values may change to "32000", this is normal [Save] [Done, Go Back] [Close Controller, Go Back - 06] Switch OFF the ignition and let the car sit for ~1 minute, then switch ON the ignition again. thx. |
