[ruslan cheng]

Hi,

I trying hard to change mileage for my bike r1200gs 2013, i have done it with toolset32 but it only for increase mileage , i have to decrease mileage in my bmskp..it did'nt work. i try to disassembly the mrbmskp.prg, i used BESTDIS, and the file was *.b1v, i have 2 week to learn, how the system work and i know where the position the system write mileage in the ic, i try to change the hex directly in the prg file and re compiler again, but the system dont warn any error, and the mileage still not change...

here the line for send the mileage :

__000BCE3F: clear S3
clear S4
xsend S3,S2
slen I3,S2
slen I4,S3
comp I4,#$0.I
jz __000BD0D6
move S1,"_TEL_ANTWORT"
scmp S1,""
jz __000BCEA1
etag __000BCEA1,"_TEL_ANTWORT"
ergy "_TEL_ANTWORT",S3

value of S1 :

clear S1
move S1,{$86.B,$12.B,$F1.B,$30.B,$A9.B,$08.B,$00.B,$00.B,$00.B}
clear S2
move S2,S1


i set new value for S2 , with the mileage i want... line :
clear S1
move S1,{$86.B,$12.B,$F1.B,$30.B,$A9.B,$08.B,$00.B,$03.B,$E8.B}
move S2,S1
xsend S3,S2
slen I3,S2
slen I4,S3

no error no warning. everything run well but mileage not change.....

the assembly command was ediabas best1 command , not same with normal assembly language


xsend command to save the mileage


maybe have any one can share... or have done this way ?