[daniel978]

Hello friends .. I sell this beautiful interface fully functional. I see why I only used once for my bmw.

who may also be interested contact me in pm. thanks


BMW INPA / Ediabas D + K + P DCAN USB interface Compatible with ISTA / D and ISTA / P
Including K -LINE adapter for vehicles without CAN -BUS !
description
The BMW USB interface

The BMW INPA / Ediabas D + K + P DCAN USB Interface is a diagnostic tool for cars from BMW . With the USB interface , all BMW vehicles can be diagnosed from the year 1996 . Benefit from a simple and modern way of diagnosing . With the user- friendly and advanced USB interface allows you to diagnose your BMW models within a few minutes and bring up to date . Installation is simple , the functionality of the interface covers all steps necessary for a comprehensive diagnosis of the vehicles concerned .

Easy diagnostics with modern technology

The USB interface has against old versions no PIN 8 availability , also the electronics were improved. PIN 8 is used in newer vehicles , especially for the " Ethernet Enable" , in older vehicles, this has been accomplished over the 2 K-Line . With the USB interface but also older vehicles can be diagnosed. For this, a special adapter is put in , which can be plugged into the interface.

functions

The USB interface is compatible with the software of SSS , Progmann , GT1, Ediabas / Inpa and many other manufacturers. The interface is particularly suitable for the diagnosis of the models E39 , E46 , E53 and E65 . Furthermore, the following CAN -BUS vehicles can be diagnosed :

Supports all BMW vehicles built from 1996 to today !

Supported protocols:

Supports High-speed CAN and PT- CAN - D up to a speed of 500 kbit / s The Low-speed K-CAN is also supported up to 100 kbit / s . Also possible to use the standard BMW ports (BMW - OBD - interface).

The installation

Installation is very simple. Before using the FTDI driver must be installed. Then, the menu must be open "Device Manager" in the Control Panel . Under the " Connections" then the new "USB Serial Port" must be selected. On the "Advanced " write the COM port are placed on an open port between one and eight . The waiting time at the BM settings must be one millisecond. The obd.ini file must now be in the folder C : \ Windows \ shifted and the computer must be restarted. Now the installation is complete.

Benefit to the USB interface of a simple and user-friendly way of vehicle diagnostics . The combination of advanced technology , aesthetic design and high usability make work a real pleasure.
The 20PIN adapter on the video is not included! is also not necessary , since this interface has been developed mainly for newer vehicles with OBD -2
Scope of delivery
D + K + P CAN-BUS Interface USB OBD II
K-Line adapter for vehicles without CAN -BUS