Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW E90 M3 kombi virgin
|
11-10-2018, 22:29 PM,
Post: #1
|
|||
|
|||
|
BMW E90 M3 kombi virgin
I have bought a BMW E90 M3 Kombi with DCT lights(ZUSB number 7841922, HW number 9179415) and put 00->1F to 0000 and 2E8->2EE to FFFF. When I installed it in the car, it took my Km and after coding it with NCS the manipulation dot was still present. I have checked with Ediabas and my VIN was saved in the new Kombi but the manipulation is still there.
I've made it virgin again and this time I wrote the VIN with Ediabas, still no change, the VIN is saved but the manipulation still present. There is another curios problem, after virginisation I am able to code the new kombi only once (doesn't matter if I use Expert or Manipulate profile). After this operation when I want to code it again I will receive the following error: Codierung fehlerhaft (allgemein) KOMB87, C_FG_AUFTRAG: ERROR_ECU_UPLOAD_NOT_ACCEPTED The M3 kombi is mounted now in a 335d E90. Does anybody has any idea why it behave like this? Attached is the memory dump that I have read from kombi after virginisation. Thank you. |
