[mattydr67]

Marcos my friend
Yes you have right
The HQ it is a name that you call this kind of tools to not make confusion when you bought an op-com that works with this newer version and the opcom that used the not modificated old versions
This opcom hardware it is the best ine in chinese market. Now as I saw the chinese sell the newer version opcom v6 which do not use the eeal PIC and that tools cannor works with newer version
If you try to upgeade or downgrade the firmware in that new opcom v 6 hardware you'll block the PIC and we talked in other thread how to make it works again.
But for sure the tool that McMihai bought it I suppose that there's a problem
I tested once an Astra G using Vaux-Com 131223d and has similar issues but only in this Astra G. I tested in the same moment again using Op-Com 131223c ( which is using fw 1.59 ) but I didn't downgrade the firmware I still used it the tool as it is with fw 1.60 and there's no problems.
Then I tried the lastest romanian version ( the one that use the fw 1.60 too- not the one that Mr. mcMihai shared here which use the fw 1.47 ) and it is working good.
I spoke with UK friends who own the genuine vaux-com and they had the same issues with this version.
Ilexa.co.uk fixed the issue but the guy who told me didn't know what they did in his computer via Team View.
The only thing that he knows that after this his tool has fw 1.61
I belive it is a bug of vaux-com
The opcom revision B it is the lasts and only revision hardware that was and it is sold in china
Revision C was a Revision B + and adaptor
Revision D it is totally diffrent and there's no relays
Revision C and Revision D could do new protocol CH-CAN
In newer cars CH-CAN
Adam - EPS
Zafira C - IMU, SAS, SADS
Insignia - IMU, SAS, SADS
Mokka - IMU, SAS
Cascada - IMU, SAS, SADS
Astra J - IMU, SAS, SADS
Apera - IMU, SAS
So you need at least Revision C to connect to this controlers
But as I said there's no newer hardware version for sell in china
I will repeat this "new" hardware opcom v6 it is not new. It is modificated because it is using a fake PIC
Good luck

P.S. - what I do not understand it is why to spend 200€ on this when you can buy for a resonable price less then 100€?

---

@McMihai
Try like this and report please
Downgrade your firmware in your HQ clone to the fw 139 using OCflash
Then install opcom 121231h or opcom121231i ( english version )
Then plug the tool to the USB and try to connect to a car ( the tool not connected to a car )
The software will upgrade the firmware in yiur interface to the fw 1.47 or 1.59 ( I don't know now but I can check later to be sure ) and then try in that Astra G.
You'll see that it will works like a charm.
@titon - when you mean old you mean the date - 2007 (on mine it is write 2014 ) or you're talking about Revision B hardware ( because $I mentioned above there's no other harware sold by chinese )
JFI - the opcom hardwares are made in china but moding and softwares or this solution it wasn't sold in china anymore.
Good luck

opcom v5-2014.rar
File Type:
Downloaded:	673 times
Size:	1.2 MB