[snyper]

Hi. I have a Peugeot I came across. It was definitely devoured by a number of mechanics previously, and been two years since it was grounded.

A 2008 peugeot 308, 1.6 HDI diesel not working. I found two sets of ecu kits, one on the car,t he other in the car. I tried to read the pin for the one in the car, using a clone Abrites, and the car just cut out all power, as if the there was no battery connected. I then connected the other BSI, and it powered. I read the PIN and it worked like a charm, I programmed a new key to it, and it was successful, but there was a 'awaiting for response from BSI' message in ECU. 

Diagbox showed ECU as locked. No wipers or windows working at this point. I changed the ECU to the second one, not same part numbers, just a slight difference, but informed got from the same type and model of car.
BSI successfully matched to ECU. 

Crank, no Start still, no fuel coming to the injectors. Checked with Diagbox, P0193 and P1351.

No fuel to the injectors, no wipers working, no windows working, etc. Any advice is highly appreciated. Did I brick the first original BSI? Did I program the BSI and key well?