[Shooting]

Mate we will try to let you understand that for this kind of tool there is no soloution yet. We do not talk here about uprade it. We are talking about fixing the defective tool that you have
Because:
1. The MCU its not PIC18F458 and its using a diffrent firmware then the fake one
2. The OPCOM V6 MCU its using a moded firmware - if you have this firmware then you caqn try it
3. The fake MCU its maybe protected so what you will read will not works if you flash it back or in other MCU as this one. That's why there's no solutions
If you still want to repair this tool you need to use the methode as in the first post
You need to change the fake MCU with a real one. For the real one there's shared dumps and for the fake one there isn't. Get it?
And I already told you in my previos posts so if you want listen it then its ok if you don't listen it what we are told you here then keep searching. Be my guest.
Good luck

I understand very well, but you may not have what I used to have,
in china when they flash the fake MCU they use a Chinese flasher.
I used to have this and thought you had it too...
I know I can change the PIC to PIC18F458 and remove 2 resistors and patch a wire from MCU, but was hoping this old flasher was still around and would save me changing the chip
and YES I have done this before so know it's possible, I just no longer can find the flasher on my PC.

wbr