Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Ak90 programmer unable to write EWS
11-02-2022, 04:26 AM,
Post: #1
XZBMW  Ak90 programmer unable to write EWS
Hello I am try to clone an EWS 3 module. Everything time I do it I get a write error. This is odd since I can read the EWS module fine! I have cleaned the chip very well too.



I also have the k line adapter but that won’t even read any EWS 3 module. Not sure on why either.


Any ideas?
Quote this message in a reply


Messages In This Thread
Ak90 programmer unable to write EWS - by egoy936 - 11-02-2022, 04:26 AM
RE: Ak90 programmer unable to write EWS - by rana - 11-02-2022, 08:06 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
PCitroen How to use a cheap CH341a programmer to read 95160 95xxx series eeproms MR2CHIPS 5 9,393 23-03-2024, 15:33 PM
Last Post: lsdlsd88
UNissan Qashqai EDC16CP33 Corrupt while OBD WRITE / Doesnt start P1611 P1612 Injectors IMMO kenbobo 2 258 22-12-2023, 13:55 PM
Last Post: kenbobo
YTMercedes Foxflash / Pcmtuner read write mercedes med17.7.5 brahem 0 254 29-10-2023, 11:09 AM
Last Post: brahem
  Nissan Qashqai EDC16CP33 with keyless corrupt after Kess write lovinedi03 5 2,341 31-05-2023, 11:26 AM
Last Post: subaslf
  write problem eeprom 95080 SAGEM S2000 PSA rahimdiag 12 1,380 16-05-2023, 06:30 AM
Last Post: raffy haddad
ORenult carprog read eeprom 95640 but not write nasim qlyb 6 1,897 19-12-2022, 13:20 PM
Last Post: domelec
  Fiat Bosch ME 7.6.3 how to VIRGINIZE (or Read Write) BOSCH 0 261 208 969 roanoke 1 958 26-11-2022, 23:34 PM
Last Post: zolee1981
ORenult Solved ✔ Renault dcm 3.4 problem to write eeprom nikosmb 2 954 24-11-2022, 18:15 PM
Last Post: nikosmb
  what programmer do i need davito1 3 546 19-09-2022, 10:43 AM
Last Post: decode_cz
XZBMW Unable to clone DDE B47D MG1CS001 (DDE803P) palapas1974 2 614 19-09-2022, 10:15 AM
Last Post: palapas1974

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content