[ir655]

Hi everyone,

A while back I helped a friend with his car with some electrical issues related to his blower fan and junction box behind the glove box.

Non removal fuse 40A behind glove box was burnt and fan was no good. He fixed the fuse that had melted and replaced the blower fan. Fan works again, but new issue appears out of nowhere now.

Car drains battery very fast and he heard a humming noise coming from engine compartment. Located it to the EPS. When he pulls the connector (feeder cable) to the EPS under the car noise stops.

He ordered a used JBE from junkyard also known as JBBF in esys. I tried coding it for him remotely, but we keep getting an error after trying to code the JBBF. "File for cafd...not found! [C012]."

I used esys 3.30.1 with psdzdata 4.32.15 and 4.37.40 with same error.

See attached images for error messages and status of modules in esys.

Anyone know what we are doing wrong? My next step was to flash his JBBF with 4.32.15 and whatever modules need updating and then try again to see if it accepts the VO coding.

I even tried VO coding other modules with same error message.

Thanks for the help!